Change Set Points And Max Frequency - Dustcontrol DC 11 Serie Instrucciones Originales

Change set point and max frequency
Green System - DC 11-Module
The following parameters can be changed :
Pr. 1 - Max Frequency; If Pr. 133 is changed then Pr.1 must be changed according to table on page 25.
Pr. 133 - Set Point
Pr. 506 - Filter Cleaning Time
To change the preset settings proceed as follows:
Operation
Press for more than 2 seconds
Press to choose the PU
operation mode
Press to choose the parameter
setting mode
P. 133
Turn until
Press to read the currently
set value for 1 cleaning station in use
Turn to change the preset
value
Press to set
Press for more than 2 seconds
P. 506
Change parameter
Press for 2s
appears
Press for 2s
in similar manner
DC 11-Module - 259
Display
0 H Ld 0.
0. 0 0
PU
P. 0
P. 1 3 3
50
44
44
P. 1
Flicker .... Parameter setting complete!!
0 H Ld
0 0
3 3
Part No 94153-D