Statement Of Use; Clutch Lubrication; Maintenance Instructions - Chicago Pneumatic CP7782 Manual De Usuario Y Guía De Seguridad

Safety Information
We, CHICAGO PNEUMATIC Tool Co. LLC,
cannot be held liable for the consequences of using
the declared values, instead of values reflecting the
actual exposure, in an individual risk assessment in
a work place situation over which we have no con-
trol.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed. An EU guide
to managing hand-arm vibration can be found by
accessing http://www.pneurop.eu/index.php
selecting 'Tools' then 'Legislation'.
We recommend a programme of health surveil-
lance to detect early symptoms which may relate to
noise or vibration exposure, so that management
procedures can be modified to help prevent future
impairment.
If this equipment is intended for fixtured appli-
cations:
The noise emission is given as a guide to the
machine-builder. Noise and vibration emission
data for the complete machine should be given
in the instruction manual for the machine.
Safety
WARNING Risk of Property Damage or Se-
vere Injury
Ensure that you read, understand and follow all
instructions before operating the tool. Failure to
follow all the instructions may result in electric
shock, fire, property damage and/or severe bod-
ily injury.
Read all Safety Information delivered to-
►
gether with the different parts of the system.
Read all Product Instructions for installa-
►
tion, operation and maintenance of the dif-
ferent parts of the system.
Read all locally legislated safety regulations
►
regarding the system and parts thereof.
Save all Safety Information and instructions
►
for future reference.

Statement of use

This product is designed for installing and remov-
ing threaded fasteners in wood, metal or plastic.
No other use permitted. For professional use only.
6
WARNING Risk of injury
►
Product specific instructions
Operation
and
See figures on page 2.
• Fix the accessories properly to the tool.
• Connect device to a clean and dry air supply.
• To start the machine, pull the trigger (A). Ma-
chine speed is increase by increasing pressure
on the trigger. Release the trigger to stop.
• To switch rotation, push the switch (B). Use
the reverse switch (B) only when the drive
spindle comes to a complete stop. Changing the
speed before the drive spindle stops may dam-
age the machine.
• To adjust output power, turn the regulator (B).
The Torque Limited Impact Wrench is intended
for initial tightening of wheel lug nuts and bolts.
Final torque should be applied manually using a
calibrated torque wrench, and following the vehi-
cle manufacturer's instructions.
Lubrication
Use an air line lubricator with SAE #10 oil, ad-
justed to two (2) drops per minute. If an air line lu-
bricator cannot be used, add air motor oil to the in-
let once a day.

Clutch lubrication

Use 0.5 oz. (14 g) of CP Pneu-Lube Synthetic
Clutch grease.

Maintenance instructions

• Follow local country environmental regula-
tions for safe handling and disposal of all
components.
• Maintenance and repair work must be carried
out by qualified personnel using only original
spare parts. Contact the manufacturer or your
nearest authorised dealer for advice on techni-
cal service or if you require spare parts.
© Chicago Pneumatic - 8940175594
If the torque is higher than 50 Nm, a reac-
tion bar must be used.
The reaction bar is designed for absorbing
the reaction torque of assembly power tools.
Impact Wrench