ABB DTS 7/1 Intrucciones De Instalación Y Uso página 16

DTS 7/2
1
AC
3) Start-up
The time and date are already set by the manufacturer.
Push the "clock" button once for at least two seconds.
The time switch is now active (the current time is shown).
Note: The time switch operates based on an "Energy Saving"
design.
4) Current time/date change
4a) Current time change
Push the "clock" button once (now the two points
between hour and minutes remain on and do not
flash).
CH2
2
3
4
5
16
CH1
7
6 8