Introduction - Manual Purpose/Field Of Application; Warrantee (Only For Italy); Symbols And Terminology; Norms And Certifications - Arneg HP3 Guia De Instalacion

1. Introduction - Manual purpose/Field of application

This instruction manual is for the HP3 refrigeration unit.
The unit's documentation consists of:
- Use and maintenance manual - installation and electronic unit use manual - system electric diagrams
- unit electric diagrams.
The following information aims to provide instructions with regard to:
- Use of the unit - technical characteristics - installation and assembly - information for personnel
responsible for use - maintenance operations.
The manual should be considered part of the unit and should be kept for as long as the unit is in place.
The manufacturer is relieved from all liability in the following situations:
- Improper use of the unit - improper installation, not performed according to the instructions provided -
electrical power defects - serious deficiencies in carrying out scheduled maintenance - non-
authorized modifications or interventions - use of non-original spare parts - partial or total disregard
for the instructions.
The manual must be available to operators and maintenance staff for consultation at all times. In the
event of transfer to third parties, it must be delivered to the new user or owner, duly informing the
suppliers in a timely manner. If lost of damaged, please contact the supplier.
N.B.READ THIS MANUAL CAREFULLY BEFORE USING THE UNIT
N.B.Electrical appliances can be dangerous to health. Current laws and regulations must be
applied during installation and use.
All persons who use this machine must read this manual.

2. Warrantee (only for Italy)

HP3 units are covered by a warrantee for one year, from the moment the system is inspected.
The warrantee includes labor and materials necessary to restore the unit to correct functioning for
problems that derive from manufacturing errors or defects.
The warrantee does not cover restoration operations for functioning caused by improper use of the
unit, or due to not following the indications contained in the unit's documentation, including the present
Manual. In the case that a "Technical Assistance Agreement" was signed, please refer to the same in
order to determine the fees and obligations which fall to the various parties.

3. Symbols and terminology

Hot surfaces
Danger high voltage
Danger
N.B.Carefully read and do not cover, damage or replace the symbols indicated above

4. Norms and certifications

- All the refrigerated unit models described in this user's manual for the HP3 series meet basic health,
safety and protection requirements set out by the following European laws and directives:
- EC Directive 2006/42 on Machinery
harmonised standards applied: EN ISO 14121:2007; EN ISO 12100-1:2009; EN ISO 12100-2:2009;
- Directive on Electromagnetic Compatibility 2004/108/EC
harmonised standards applied: EN 61000-3-2:2006; EN 61000-3-12:2005; EN 61000-6-1:2007 EN
61000-6-3:2007;
- Directive on Low Voltage 2006/95/EC: applied EN norms: EN 60204-1:2006;
- PED Directive for pressurized devices 97/23/EC as modified:
harmonised standards applied: EN 378 -1 :2008-07; EN 378-2:2009
05060114 00 09/07/2010
Indicates hot surfaces
It is placed near mechanical parts capable of reaching temperatures high enough to cause
burns
Indicates danger due to the presence of powered parts.
It is placed where there is a risk of electrocution
Indication of generic danger
It is placed near mechanical parts that can cause mechanical or generic risks
HP3
English
17