Switching The Subtitles (Subtitle Language); Switching From The Disc Menu; Displaying The Disc Status For Dvd/Video Cd - Alpine IVA-W203 Manual De Operación

Estación multimedia móvil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Video CDs or DVD-VR disc with multiplex audio
1
During playback, touch [P1/2]
The function guide changes.
2
*
Touch [P1/3] while playing a DVD-VR disc.
2
3
Touch [AUDIO]*
.
The left and right channels will be output as shown below,
each time the button is touched.
3
*
Touch [AUDIO] for at least 2 seconds to switch while playing a
DVD-VR disc.
AUDIO LL
AUDIO RR
Switching the Subtitles (Subtitle
Language)
With DVDs on which multiple subtitle languages are recorded, the
subtitle language can be switched during playback; moreover, subtitles
can be hidden.
1
During playback, touch [P1/2]*.
The function guide changes.
* Touch [P1/3] while playing a DVD-Audio or DVD-VR disc.
2
Touch [SUBT.].
Touching this button repeatedly selects sequentially the
subtitle languages recorded on the disc, and then turns the
subtitles OFF.
• To play back a DVD-Audio disc, set "VCAP" in "Setting of the DVD-
Audio Playback Mode" (page 32).
• There may be a delay before the selected subtitle appears.
• Not all discs will allow changing the subtitles during playback. In
these cases, select subtitles from the DVDs menu.
• The subtitle language selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that language, the disc's default language is selected instead.
However, the subtitle language may differ depending on the disc.
• For some discs, the subtitles will be displayed even when this is set to
OFF. However, the subtitle language may differ depending on the
disc.
• Switches the subtitles ON/OFF while playing a DVD-VR disc.

Switching from the disc menu

For some discs, the audio language, angle and subtitles can be switched
from the disc menu.
1
Touch [MENU] or [TOP MENU] to display the
menu.
2
Select an item to confirm it.
See "If a menu screen appears" on page 19.
24
-EN
2
.
*
AUDIO LR
AUDIO LL
Displaying the Disc Status for DVD/Video
CD
Use the procedure described below to display the status (title number,
chapter number, group number, etc.) of the currently playing DVD or of
the currently playing Video CD (track number, etc.) on the monitor.
1
During playback, touch the display panel.
The operation menu screen is displayed.
2
Touch [CONTROL] within 5 seconds.
The display status is displayed for 5 seconds.
• To play back a DVD-Audio disc, set "VCAP" in "Setting of the DVD-
Audio Playback Mode" (page 32).

Publicidad

Tabla de contenido
loading

Tabla de contenido