Almacenamiento Del Cable De Alimentación; El Kit De Mantenimiento De La Selladora Al Vacío - Weston PRO Serie Manual De Instrucciones

R e c on n e c t with Re a l F ood
VACUUM
PRO-2100
SEALER
U.S. P atented
Almacenamiento
del cable de
alimentación
9
7 / 10
Tapa de
vacío
12
5
13
20
QUICK REFERENCE GUIDE
AUTOMATIC VACUUM SEAL
1. PLUG power cord into 120-Volt outlet
2. Turn the POWER SWITCH to the "ON" position
3. Place VACUUM BAG OPEN END into VACUUM CHAMBER (See Instruction Book for Details)
4. CLOSE LID – APPLY PRESSURE to HANDLE – push START button
5. The machine will VACUUM and SEAL automatically*
MANUAL SEAL MODE
MANUAL SEAL MODE is used to disengage the vacuum pump and engage the sealing function manually
1. Follow steps 1-4 of the Automatic Vacuum Seal Instructions
2. When the desired vaccum is reached, press the MANUAL SEAL BUTTON
3. The machine will begin sealing the bag*
* The Sealing Time is pre-set to 3 seconds. The Cooling Time is pre-set to 3 seconds.
THIS IS ONLY A QUICK REFERENCE GUIDE. THOROUGHLY READ AND UNDERSTAND
THE SUPPLIED INSTRUCTION MANUAL BEFORE USING THIS APPLIANCE.
El kit de mantenimiento de la
selladora al vacío
se vende por separado
Modelo N.º 08-0501-W
POWER
VACUUM
SEAL
COOL
8
6 / 11
2
3
4
puerto del cable
de alimentación
STOP
MANUAL SEAL
START
1