Technical Specifications - B&W CM7 Manual De Instrucciones

Technical features
Description
Drive units
Frequency range
Frequency response
Dispersion
Sensitivity
Harmonic distortion
Nominal impedance
Crossover frequencies
Recommended amplifier power
Max. recommended
cable impedance
Dimensions
Net weight
CM7
Nautilus™ tube loaded aluminium dome tweeter
Kevlar® brand fibre cone FST midrange
Flowport™
3-way vented-box system
1x ø25mm (1 in) aluminium dome high-frequency
1x ø130mm (5 in) woven Kevlar® cone FST midrange
1x ø165mm (6.5 in) paper/Kevlar® cone bass
-6dB at 34Hz and 50kHz
62Hz - 22kHz ±3dB on reference axis
Within 2dB of reference response
Horizontal: over 60º arc
Vertical: over 10º arc
88dB spl (2.83V, 1m)
2nd and 3rd harmonics (90dB, 1m)
<1% 100Hz - 22kHz
<0.5% 150Hz - 20kHz
8Ω (minimum 3.0Ω)
350Hz, 4kHz
Bass unit 3rd order low pass
Midrange 2nd-order high-pass, 1st order low-pass
Tweeter 1st-order high-pass
30W - 150W into 8Ω on unclipped programme
0.1Ω
Height: 910mm (35.8 in) not including feet
Width: 200mm (7.9 in)
Depth: 280mm (11 in) cabinet only
300mm (11.8 in) including grille and terminals
20kg (44 lb)
51