Descaling Program; General Maintenance - Krups ESPRESSERIA AUTOMATIC PREMIUM Manual De Instrucciones

DESCALING PROGRAM – TOTAL DURATION: ABOUT 22 MINUTES
If your product is equipped with our Claris - Aqua Filter System cartridge F088, please remove this
cartridge before the descaling operation.
The quantity of scale deposited depends on the hardness of the water used. The machine will automatically warn you with a
message when you need to proceed with descaling.
Caution! To benefit from the warranty conditions, it is essential to perform the machine descaling
cycle when the machine tells you to do so. Be sure to follow the order of operations.
You can continue to use the machine but you are advised to perform the operation as soon as possible.
To perform the descaling program, you will need a container with minimum capacity of 21 oz/0.6 l and a Krups F 054 (40 g)
descaling powder.
Press the
descaling program when this message is
displayed SERVICES => OK => DESCALING
The descaling program is in three parts – a descaling cycle, then 2 rinsing cycles.
Only use Krups descaling products. You can obtain descaling products from Krups Service Centers.
The manufacturer may not be held responsible for damage to the machine through use of cleaners or descalers
not specifically recommended.
If a power failure occurs during the cycle, you will have to restart from the beginning.
You will not be able to postpone this operation.
Be sure to complete the entire descaling cycle to avoid any risk of ingestion of the cleaning solution.
Do not put your hands under the coffee outlets during the cycle.
Make certain to protect your work surface during descaling cycles, especially if they are made
of marble, stone or wood.
Always remove the power supply cord from the socket and let your machine cool down before cleaning it.
Do not use utensils or cleaning products likely to scratch or corrode the machine.
Wipe the body of the machine on the outside using a moist cloth.
Clean the cleaning tray, the drip tray and its grid,
and the coffee grounds collector with hot water
and a mild liquid detergent.
These parts are not designed to go into the dishwasher.
button to start the automatic

GENERAL MAINTENANCE

Follow the instructions shown
on the screen, making sure the
powder dissolves fully.
Rinse the water tank
with fresh water.
11