Installing The Usb Device Driver - TANDD RTR-500GSM Manual De Introducción

Installing the USB Device Driver

Have you already installed the supplied software?
Before connecting a Unit to a PC with a USB cable make sure to install the supplied
software first.
If the Base Unit is not an RTR-500GSM, please follow directions for installing the
USB Device Drivers found in the Introductory Manual that came with the Base Unit
you are using.
1. Open the "RTR-
500GSM for Windows"
from the Start Screen
or Start Menu.
2. Open the RTR-
500GSM Settings
Utility.
3. Connect the Unit with the supplied USB cable to your computer.
The USB driver installation will start automatically.
* Do not connect a Unit to your computer until the software has been
installed.
* It is not necessary to connect the AC adaptor at this point.
For Windows XP:
The [Found New Hardware Wizard] window will appear. Please see "USB Driver
for Windows XP" for details (see page 28).
4. After the USB driver installation is completed, the factory
default settings will be displayed automatically in the settings
window.
Launcher Window
Instalación del software y el controlador del dispositivo USB
27