Replacing Front Parking Lamp/Turn Signal/Sidemarker Bulbs - Ford Explorer 2008 Manual De Instrucciones

Lights
3. Disconnect the electrical
connector.
4. Remove the old bulb by turning
counterclockwise and pull it out.
Handle a halogen headlamp bulb carefully and keep out of
children's reach. Grasp the bulb only by its plastic base and do
not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.
Reverse steps to reinstall bulb(s).

Replacing front parking lamp/turn signal/sidemarker bulbs

1. Turn off the headlamps and open
the hood.
2. Remove three screws from the
headlamp assembly and pull
headlamp forward.
3. Rotate the bulb socket
counterclockwise and remove it
from the lamp assembly.
4. Pull the bulb straight out of the
socket.
Reverse steps to reinstall bulb(s).
96
2008 Explorer (exp)
Owners Guide (post-2002-fmt)
USA (fus)