Adjust The Cutting Clearance; Storage; Guarantee - Grizzly HRM 38 Manual Del Usuario

GB
Adjust the Cutting
Clearance
The blade cylinder blades must be ad-
justed if the grass is no longer being cut
evenly and cleanly.
1. Remove the machine key (3)
and metal strips (feeler gauge)
(4) from the machine holder
(cf. 5).
2. Push the metal strip (4) be-
tween a blade cylinder (8) blade
and the sub-blade (11).
3. Turn the hex bolts (10) to the
right then to the left on the
machine, in small steps in the
clockwise direction until the
metal strip sticks slightly.
4. Check the setting by turning
the blade cylinder. None of the
blade cylinder blades should be
in contact and grinding on the
sub-blade.
If it is no longer possible to adjust
the cutting clearance, the blade
cylinder and sub-blade must be
replaced as a set.
22

Storage

• Keep the machine dry and out of
reach of children.
For space-saving storage, loosen
the wing nuts and fold the handle
bar together.

Guarantee

• This appliance has a 24-month guar-
antee. Commercial use will invalidate
the guarantee.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee. Certain com-
ponents are subject to normal wear
and tear and are excluded from the
guarantee. These include in particular:
blade cylinder and sub-blade.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
This requires that the appliance is re-
turned to the merchant undismantled
and with proof of purchase and guar-
antee.