Friedrich Q Chassis Serie Manual De Instalación Y Funcionamiento página 12

Use the or buttons to adjust the day (1 to 7). The day setting is up
to you the user. If you set the current day = 1, and today is Tuesday,
then Day 1 = Tuesday.
AUTO FAN
Press TIMER SET (Refer to Figure 8) button to exit and save the SET
TIME function. The TIMER SET button must be pressed within 15 second.
Button inactivity for more than 15 seconds causes the display to time out
and return to the normal operating display.
ºF - ºC Select
AUTO FAN
To switch from degrees Fahrenheit (F) to Celsius (C), press
buttons simultaneously for three seconds. s
An "F" will ash for 5 seconds and then revert to a normal display. To change
from F to C, press the or
12
4
79
F
SET POINT
79
F
SET POINT
f
button within 5 seconds.
FRR130
A "C" will ash for 5 seconds and then revert to a normal display.
The ºF icon goes away and the ºC icon illuminates on the normal display.
FRR131
DIM Function
There are three separate display brightness levels, AUTO, 20% and full
(100%). To change the DIM setting, press the Power button for three
seconds.
FRR132
The 1 indicates a DIM setting of Auto (factory default). Use the
buttons to change the setting.
FRR133
The 2 indicates a DIM setting of 20%. Press the TIMER SET button within
15 seconds to save the setting. Button inactivity for more than 15 seconds
causes the display to time out and return to the normal operating display.
C
26
C
AUTO FAN
SET POINT
1
2
FRR134
FRR135
FRR192
or
FRR193