Friedrich Q Chassis Serie Manual De Instalación Y Funcionamiento página 16

AUTO FAN
The display returns to normal once the settings are saved.
Timer - Scheduler Control Block
AUTO FAN
If the unit is operating in the TIMER or SCHEDULE mode, and then you
press any button except the
blink. All button action is blocked.
The Timer icon stops blinking after 3 seconds.
AUTO FAN
You must turn the active Timer or Schedule mode OFF before making
changes. Once the changes are made, press the button
activate Timer or Schedule mode.
AUTO FAN
Timer or schedule mode reactivated.
16
79
F
SET POINT
79
F
SET POINT
SCHEDULE
button, the Timer icon begins to
79
F
SET POINT
79
F
SET POINT
SCHEDULE
Schedule ON Scenarios
FRR147
The display shows a normal system.
If the Schedule function is turned ON during normal operation
FRR148
the
SCHEDULE
runs the current period schedule parameters.
FRR150
to re-
FRR149
79
AUTO FAN
SET POINT
and Timer icons illuminates. The control system immediately
F
FRR154
SCHEDULE
FRR153