Hoshizaki Snowflake GII SUR-65BG Manual De Operación, Mantenimiento E Instalación página 11

Sno wf lak e GII
To exit the process, repeatedly press the UP or DOWN buttons until the display shows the cabinet
temperature or wait 60 seconds without pressing any buttons.
Alternative Exit method: press and release the ON/STANDBY button. If there are no alarms recorded,
the LS code will not be displayed.
ERROR CODES
Code Description
Pr1 Cabinet probe error
Pr2 Evaporator probe error
The correction of these errors can only be undertaken by qualified technical personnel.
OPERATION STATUSES
Available operation statuses are listed below:
Status Description
ON The cabinet is powered up and operating
STANDBY The cabinet is powered up but switched off
OFF The cabinet has no power, the plug is not in the socket,
or the main isolator is turned off
Do not carry out any maintenance or repair while the cabinet is in on or standby mode. Only when
the power supply is completely isolated from the cabinet can any works be done.
IMPORTANT
EN 11