Burning Wood - Dovre Kachel 750GH Instrucciones De Instalacion Y Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 98
1. Stack two layers of medium sized logs crosswise.
2. Stack two layers of kindling crosswise on top of
the logs.
3. Place a firelighter cube in the lower layer of
kindling and light the cube according to the
instructions on the packaging.
4. Close the door of the appliance and open the
primary air inlet and the secondary air inlet of the
appliance by completely opening the primary and
secondary air sliders; see the following figure.
5. Let the fire develop into a good blaze until there is
glowing bed of charcoal. After this you can add
more fuel and start to control the appliance; see
the paragraphs "Burning wood", "Burning brown
coal briquettes (750GM only)" and "Burning
anthracite coal (750GM only)".
10
= Open
o

Burning wood

After you have followed the instructions for lighting:
1. Slowly open the door of the appliance.
2. Spread out the charcoal bed evenly across the
bottom of the fire compartment.
3. Stack a few logs on the charcoal bed.
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
Subject to change because of technical improvements
= Closed
l

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kachel 750gm

Tabla de contenido