Briggs & Stratton BRUTE Manual Del Operador página 7

Ocultar thumbs Ver también para BRUTE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING
Starter and other rotating parts can
entangle hands, hair, clothing, or
accessories.
• NEVER operate pressure washer without protective
housing or covers.
• DO NOT wear loose clothing, jewelry or anything that
may be caught in the starter or other rotating parts.
• Tie up long hair and remove jewelry.
WARNING
Risk of eye injury.
Spray can splash back or propel objects.
• Always wear safety goggles when using this equipment
or in vicinity of where equipment is in use.
• Before starting the pressure washer, be sure you are
wearing adequate safety goggles.
• NEVER substitute safety glasses for safety goggles.
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• DO NOT secure spray gun in open position.
• DO NOT leave spray gun unattended while machine is
running.
• NEVER use a spray gun which does not have a trigger
lock or trigger guard in place and in working order.
• Always be certain spray gun, nozzles and accessories
are correctly attached.
NOTICE
High pressure spray may damage fragile items
including glass.
• DO NOT point spray gun at glass when in jet spray
mode.
• NEVER aim spray gun at plants.
NOTICE
Improper treatment of pressure washer can damage
it and shorten its life.
• If you have questions about intended use, ask dealer or
contact qualified service center.
• NEVER operate units with broken or missing parts, or
without protective housing or covers.
• DO NOT by-pass any safety device on this machine.
• DO NOT tamper with governed speed.
• DO NOT operate pressure washer above rated pressure.
• DO NOT modify pressure washer in any way.
• Before starting pressure washer in cold weather, check
all parts of the equipment to be sure ice has not formed
there.
• NEVER move machine by pulling on hoses. Use handle
provided on unit.
• Check fuel system for leaks or signs of deterioration,
such as chafed or spongy hose, loose or missing clamps,
or damaged tank or cap. Correct all defects before
operating pressure washer.
• This equipment is designed to be used with Briggs &
Stratton Power Products authorized parts ONLY. If
equipment is used with parts that DO NOT comply with
minimum specifications, user assumes all risks and
liabilities.
5

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

020290Troy-bilt 2550Troy-bilt 020292-0

Tabla de contenido