Selecting A Location And Securing The Safe - STACK-ON PFS-1608 Manual Del Proprietário

SELECTING A LOCATION AND SECURING THE SAFE

The safe must be mounted to a wall stud, and a permanent shelf or the floor. For optimal
safety and security, the safe should be installed in an isolated, dry and secure area.
NOTE ON LOCKING THE SAFE: The safe must to be in an upright position for the locking
mechanism to function properly. Failure to mount the safe in the correct upright position will
compromise the safety and security of the safe.
NOTE: The safe must be secured to a wall stud on one side of the safe in one of the holes in
the back of the safe so that it is anchored to a wall stud. A wall anchor should be used on the
other side. The safe should also be mounted to a permanent shelf or to the floor. Use the
hardware provided or consult your hardware retailer for fastening hardware for your particular
mounting surfaces.
STEP 1
1
Slowly drill out all mounting holes located on the back and bottom of safe as shown below.
DO NOT DRILL FROM A RANDOM LOCATION FROM INSIDE THE SAFE.
PFS-1608
®
THE SAFE SHOULD ALWAYS BE KEPT
OUT OF THE REACH OF CHILDREN
PAGE 7 of 28
OWNER'S MANUAL
40714-1609