General IRT203 Manual Del Propietário página 2

IRT203 Manual-FINALrev-001208
The thermometer is a non-contact infrared thermometer. Simply aim
the thermometer at the target and press the 'Scan key' to display the
surface temperature.
LASER INFORMATION:
(FOR MODELS WITH LASER ONLY)
By partially pressing the 'Scan key', the device will begin to measure
the temperature of the target. When the 'Scan key' is completely
depressed, the laser will operate.
CAUTION!
1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE
LASER BEAM–PERMANENT EYE DAMAGE MAY RESULT.
2. USE EXTREME CAUTION WHEN OPERATING THE LASER.
3. NEVER POINT THE DEVICE TOWARDS ANYONE'S EYES.
4. KEEP OUT OF REACH OF ALL CHILDREN.
°C OR °F MODE
To change the thermometer from '°C' to '°F' or from '°F' to '°C', firstly
turn the instrument on by pressing the 'Scan key', then press the
'Mode key' four times, the '°C' or '°F' symbol will flash, press the
'Scan key' to change to scale.
2/12/08 3:36 PM
'Scan' Button
'Mode' Button
Pag