Sony Handycam HDR-CX 100 Guía De Operaciónes página 53

If indicators appear on the LCD screen,
check the fbllowing.
If the problem persists ew, n after you
have tried to fix a couple of times, contact
your SoW dealer or local authorized SoW
service facility.
C:04:1_1_
• The battery pack is not an "IntoLITHIUM"
battery pack (H series). Use an
"InfoLITHIUM" battery pack (H series)
(p. 13).
• Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 13).
C:13:[Z][Z] / C:3 2:[El[El
• Remove the power source. Reconnect it and
operate your camcorder again.
E:20:I_I_ / E:31 :DI_ / E:61 :DI_ / E:62:1_1_
/ E:91 :DI_ / E:94:1_1_
• _ur camcorder needs to be repaired. Contact
your So W dealer or local authorized Sony
service facilit T Infbnn them of the 5-digit
code, which starts from "E;'
101-0001
• When the indicator flashes slowly, the file is
damaged or unreadable.
• Battery power is lo_:
• No "Memory Stick PRO Dug' media is
inserted (p. 44).
• When the indicator flashes, there is not
enough ti'ee space for recording images. Delete
unnecessary images (p. 42), or fnnnat the
"Memory Stick PRO Duo" media (p. 42) after
storing the images on other media.
• The hnage Database File is damaged. Check
the hnage Database File by touching t_"
(HOME) _ _ (MANAGE MEDIA)
[REPAIR IMG.DB El _ recording media.
• The "Memory Stick PRO Duo" media is
damaged. Format the "Memory Stick PRO
Duo" media with your camcorder (p. 42).
• Incompatible "Memory StickDuo" media is
inserted (p. 44).
[_ o...._
• Access to the "Memory Stick PRO Dug' media
was restricted on another device.
• The camcorder is unstead}: Hold the camcorder
steady with both hands. However, note that
the camera-shake warning indicator does not
disappear.
• The recording media is full. Delete unnecessary
images (p. 42).
• Photos cannot be recorded during processing.
\_ait tbr a wlfile, then record.
g
_3