WARNING
!
To avoid serious injury or death, NEVER place infant carrier on
elevated surface seat with child in it.
!
The parts of this infant child restraint should not be lubricated in any
way.
!
Always secure child in infant child restraint, even on short trips, as
this is when most accidents occur.
!
DO NOT use this infant child restraint for more than 5 years after the
purchase date as parts may degrade over time, or from exposure to
sunlight, and may not perform adequately in a crash.
!
Frequently check the ISOFIX guides for dirt and clean them if neces-
sary. Reliability can be effected by ingress of dirt, dust, food particles
etc.
!
DO NOT place any objects in the load leg area in front of your base.
Emergency
In case of emergency or accidents, it is most important to have your
child taken care of with first aid and medical treatment immediately.
Product Information
" i-Size" (Integral Universal ISOFIX Child Restraint Systems) is a
category of Infant Child Restraint System for use in all i-Size seating
position of a vehicle.
3
1. According to the ECE R129/00 Regulation, the infant carrier with
Base is a Universal ISOFIX Class C, D infant child restraint and
should be fitted using the ISOFIX connections.
2. This is an "i-Size" child restraint System. It is approved to
Regulation ECE R129/00, for use in, "i-Size compatible" vehicle
seating positions as indicated by vehicle manufacturers in the
vehicle users' manual.
3. If in doubt, please consult the infant child restraint manufacturer or
the retailer. This is an i-Size ISOFIX CHILD RESTRAINT SYSTEM.
It is approved to ECE R129/00 series of amendments, not all vehicle
manufacture's handbooks list i-Size compatibility yet. This seat and
base is also approved for use in ISOFIX compatible vehicles. Please
refer to the vehicle manufacturer's website or consult your dealer.
It will fit vehicles with positions approved as i-Size ISOFIX positions (as
detailed in the vehicle handbook), depending on the category of the
infant child restraint and of the fixture.
Materials
Plastics, metal, fabrics
Patent No.
Patents pending
4