Features And Controls - Troy-Bilt 01924 Manual Del Usuario

Features and Controls
KNOWYOUR GENERATOR
Read this owner's manua[ and safety fumes before operating },our generator.
Compare ths illustration with your generator to familiarize yourseff with the locations of various controls and
ad]ustments. Save this manual for future reference.
Rod<er Switch
Fuel Tan[<
/
Recoil
Starter
Oil Fill Cap/Dipstid<
Duplex Receptacles
\
Choke Lever
Air
Cleaner
Circuit Breakers
120/240 Volt AC,
20 Amp Receptacle
Grounding Fastener
Data Tag
[ 20 Volt AC, 20 Amp, Duplex Receptacles -- Hay be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting,
appliance, tool and motor loads.
i 20/240 Volt AC, 20 Amp Locking Receptacle -- Hay
be used to supply electrical power for the operation of
120 and/or 240VoltAC, 20 Amp, single phase, 60 Hz
electrical, lighting, appliance, tool and motor loads.
Air Cleaner -- Uses a dry type filter element to limit the
amount of dirt and dust sucked into the engine.
Choke [,ever -- Used when starting a cold engine.
Circuit Breakers (AG) -- Push to reset circuit breakers are
provided to protect the generator against electrical overload.
DataTag -- Provides mode[, revision and serial number of
generaton Please have these readily available when calling
for assistance.
Fuel Tank -- Capacity of four (4) U.S. gallons.
Grounding Fastener -- If required, please consult a
qualified electrician, electrical inspector, or local agency
having [urisdiction.
Oil Fill Cap/Dipstick -- Check and fill engine with oil
here.
Recoil starter -- Used to start the engine.
Rocker Switch -- Set this switch to "On" before using
recoil starter. Set switch to "Off' to switch off engine.