Usb Input; Bluetooth Operation - Trevi XR 400 APP Manual Para El Uso Y La Conexión

ENGLISH

USB INPUT

1. Press the FUNC / STANDBY / LIGHT button (7) on the unit and select "USB".
2. Insert a USB memory into the USB input (10). Playback starts automatically.
3. To pause playback, press the / / BT / SCAN (4) button, the display will start to flash.
4. To resume playback, press the / / BT / SCAN key (4) again.
5. By pressing the button (3) during the listening, it goes to the next track, while with the button (2) to the previous tracks.
6. Press and hold the (3) or (2) button to skip to the next or previous 10th track.
7. By long pressing the EQ / P-MODE button (1) it is possible to activate the various repeat modes of the tracks.
To deactivate the repetition, press the EQ / P-MODE button (1) several times until the icon disappears from the display.
NOTE
- Do not use the USB CHARGE (11) port for audio playback.
- The player may not support some USB devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.

BLUETOOTH OPERATION

1. Switch on the appliance and press the FUNC / STANDBY / LIGHT button (7) to select the bluetooth function, the message BT
appears on the display.
2. In Bluetooth mode, the indicator LED (13, PAIR) will start to flash, the system will automatically search.
3. Activate the Bluetooth functionality on the external device to be paired.
4. Start the device search. At the end select the "TREVI XR 400 APP" device.
Note: a second XR400APP device (without the word TREVI) may appear for the app to function. For the BT connection select
TREVI XR 400 APP.
5. Enter the password "0000" if required.
6. Start music playback from your device. Press the / / BT / SCAN key (4) to activate the pause and the (2) or (3) keys to
select tracks.
7. Hold down the/ / BT / SCAN key (4) for a few seconds to eliminate the pairing and perform a new pairing operation.
AUX-IN
1. Press the FUNC / STANDBY / LIGHT button (7) on the unit to select "AUX" mode.
2. Connect any unit with audio output through the appropriate 3.5mm jack cable (not included) to the AUX input (9).
3. Adjust the external device from your commands.
"PARTY KING" APPLICATION
The application is only available in English for Android / iOS devices.
To control the device via smartphone, tablet, or other devices, download the "PARTY KING" application from the respective market stores.
The application will allow you to control the following modes: Player, Light, USB input, FM radio, Aux In input, equalizer.
Once the device is connected to the external device via Bluetooth connection (as described in the Bluetooth Operation section),
open the "PARTY KING" app on the smartphone / tablet.
Pairing the application to the device
After pairing the smartphone / tablet as described in the Bluetooth Operation paragraph, it is necessary to make a further coupling
of the application to the device:
1. Press the REFRESH button and when the XR 400 APP appears in the list of available devices, select it.
Once connected, the device will move to the list of connected devices (Connected device).
10
XR 400 APP