Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
7) Attach supply lines to 1/2" IPS inlet
connections on faucet body (G).
Using a wrench, finish with one half
turn. DO NOT overtighten.
Maintenance
1) Turn off water. Loosen and
remove handle set screw (D),
handle (B), nut (C) and old
cartridge (E or F).
2
B
D
C
4
Finish is spotting.
Symmons Industries, Inc.
Copyright © 2019 Symmons Industries, Inc.
8) Attach supply lines to shut-off
valves and hand tighten. Using a
wrench, finish with one-half turn.
DO NOT overtighten.
1
G
2) Correctly align new cartridge (E
or F) and insert into faucet body
(G). Install and secure nut (C).
3
5
6
F
Troubleshooting Chart
Elements in water supply may cause
water staining on finish.
■
■
31 Brooks Drive
Braintree, MA 02184
■
symmons.com
1
2
C
2
F
1
G
3
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
■
Phone: (800) 796-6667
■
gethelp@symmons.com
9) Remove aerator (H) and flush
lines free of debris. Check for
leaks.
3) Replace handle (B) and reinstall set
screw (D). Tighten set screw.
D
2
Clean finished trim area with a soft
rinse with water.
■
Fax: (800) 961-9621
■
■
ZV-3119 REV F
052019
H
B
1
Publicidad
Tabla de contenido
