Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
7) Attach supply lines to 1/2" IPS inlet
connections on faucet body (H).
Using a wrench, finish with one half
turn. DO NOT overtighten.
1
1
1
1
Maintenance
1) Remove plug button (C) and
set screw (B). Turning counter-
clockwise, disassemble handle
(A), collar (D) and nut (F) from
cartridge (G).
A
D
G
Finish is spotting.
Symmons Industries, Inc.
Copyright © 2019 Symmons Industries, Inc.
8) Attach supply lines to shut-off
valves and hand tighten. Using a
wrench, finish with one-half turn.
DO NOT overtighten.
1
H
4 2
2) Remove cartridge (G) from faucet
body (H). Inspect for debris.
Replace cartridge if necessary.
C
B
F
Troubleshooting Chart
Elements in water supply may cause
water staining on finish.
■
31 Brooks Drive
■
1
2
G
H
■
■
Braintree, MA 02184
Phone: (800) 796-6667
■
symmons.com
gethelp@symmons.com
9) Remove aerator (I) and flush lines
free of debris. Check for leaks.
1
Note: Counterclock-
wise to lower tem-
perature, clockwise
to increase tempera-
ture.
3) Correctly align cartridge (G) and
insert into faucet body (H). Install
handle assembly following step 1
in reverse.
A
D
F
G
H
1
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
■
Fax: (800) 961-9621
■
■
ZV-3117 REV G
052019
I
C
B
Publicidad
Tabla de contenido
