Operational Anomalies; After Sales Service - Pando E-320 Instrucciones Para El Uso Y De Montaje

OPERATIONAL
ANOMALIES
PROBLEM
The cooker hood
does not work...
The cooker hood has
low performances...
The cooker hood
stops in the middle of
operation.

AFTER SALES SERVICE

Any after-sales operations, during the warranty period, should be carried out by a qualified professional
technician, authorized by the brand or by the retailer.
● The product needs to have an easy access inside the cabinet to the electronic components for any pos-
sible after-sales and/or maintenance operations.
● The motor needs to have an easy access for any possible after-sales and/or maintenance operations.
● If the product does not have an easy access, the after-sales operation under warranty will not be carried
out until the end-user or the installer will not make the product accessible.
When calling, please mention the appliance details (Type Fig. 13A and equipment Fig. 13B and
production date Fig. 13C).
This information is mentioned on the rating label and the production date one placed on the lower
side of the downdraft.
E-320
Check that:
● There is not a power outage.
● A specific speed has actually been selected.
● The 9 pole connection is inserted properly.
● The red reset key, found over the electrical system box, is pushed.
● Make sure that the wires of the 9 pole connection are inserted properly
in the connector itself (during the connection phase, an excessive
pressure could bend the contacts).
Check that:
● The motor speed selected is sufficient for the quantity of fumes and
vapors present in the room.
● The kitchen is ventilated well enough to allow air for intake.
● The charcoal filter is not worn out.( filtering version cooker hood).
● The air outlet channel is free and compliant with paragraph no. 2.
● The non-return valves of the suctioning unit are free to rotate.
Check that:
● There is not a power outage.
● The omnipolar device has not tripped.
NOTA
EN
SOLUTION
27