Sony KDL-22BX320 Manual De Instrucciones página 28

Factory Mode
--Color Temperature--
Back
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Recall Data
Data Backup
5. Press the or
(Cool, Neutral, Warm1, or Warm2.)
6. After the correct Color Temperature is selected, press the
to select the Temperature type that needs to be modified.
7. After the correct Temperature type is selected, press the
to increase the data value, or press
value.
8. Complete the data value adjustments to the remaining
temperature items within the selected temperature type.
NOTE: Changes to the data value must be saved within the
Temperature type selected before making changes to one of
the other Temperature types.
9. To save the changes, press the
then press .
KDL-22BX320/22BX321
>>
<[ Cool ]>
<[ 443 ]>
<[ 443 ]>
<[ 443 ]>
<[ 512 ]>
<[ 512 ]>
<[ 512 ]>
<[ Off ]>
<[ Off ]>
[</>]Set [Menu] Exit
buttons to select the Color Temp type.
to decrease the data
to select Data Backup,
SEC 3. SERVICE ADJUSTMENTS
Back
Color Temp
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Recall Data
Data Backup
10. Do one of the following:
a. To make changes to one of the other Temperature types,
repeat steps 5 through 9.
b. To exit Factory mode, press
NOTE: The other categories listed in the Factory Mode menu
will be covered in the training manual for these models.
Factory Mode
--Color Temperature--
>>
<[ Cool
<[ 443
<[ 443
<[ 443
<[ 512
<[ 512
<[ 512
<[ Off
<[ W/B
[</>]Set [Menu] Exit
POWER
]>
]>
]>
]>
]>
]>
]>
]>
]>
23