Sony KDL-22BX320 Manual De Instrucciones página 84

3
Adjust the angle of the Mounting Hook.
4
Align the holes on the right Mounting Hook with the corresponding holes on the rear of the
TV.
Secure them to the TV using two screws (supplied with SU-WL100).
Step 6: Installing the TV on the Base Plate
Refer to the Instructions for SU-WL100.
1
Connect the cables to the corresponding inputs on the rear of the TV.
For details on the cable connection, see "Connecting Other Equipment" on page 13.
2
Install the TV onto the Base Plate.
• When using an electric screwdriver to tighten the screws, the torque must be approximately
1.5 N·m {15 kgf·cm}. Do not lift the Mounting Hook before the screws (two screws each for
left /right) are secured.
Mounting Hook
Arm
Screw
(+PSW 4 × 12)
Mounting Hook
53