[] PC Settings
Thisfunction letsyouadjustthe PC screen position, c lockandphase during
PCinput.
1
Press [SETUP] to display the main menu.
2
Use [Cursor • / V] to select"PC
SETTING",
then press [ENTER].
e.g.) PC mode
or
- TVSETUP
-
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE
[ENGLISH]
CAPTION
[OFF]
BACK LIGHT
[BRIGHT]
COLOR TEMR
[NORMAL]
PC SETTING
3
Adjust the setting.
AUTO ADJUSTMENT
Use [Cursor •IV]
to select "AUTO ADJUSTMENT",
then press [ENTER].
or
- PC SETTING-
AUTO ADJUSTMENT
HORIZONTALPOSITION
[ 15]
VERTICAL POSITION
[-15]
CLOCK
[ -5]
PHASE
[
0]
CLOCK, PHASE
Use [Cursor
•IV]
to select an item,
then use [Cursor _/1_] to adjust the "CLOCK" setting
to stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Cursor
_1
Cursor
I_
CLOCK
to decrease
setting
value
to increase
setting
value
PHASE
Press [SETUP]
to exit.
Note:
•Adjust the "PHASE" setting after the "CLOCK"setting has
been properly adjusted,
• You may not obtain an appropriate screen with auto
adjustment for some signals, In this case,adjust the settings
manually,
• The Horizontal/Vertical
position,
clock and phase of
the PC screen are automatically
adjusted
in a few
seconds.
HORIZONTAL
POSITION,
VERTICAL POSITION
Use [Cursor •IV]
to select an item,
then use Cursor _/1_] to adjust the PC screen position.
HORIZONTAL
POSITION
VERTICAL
POSITION
Cursor _1
Cursor I_
to move PC screen left
to move PCscreen right
to move PC screen down
to move
PC screen up
EN