Ingeteam INGEREV CITY Wall Serie Manual De Instalacion Y Uso página 26

Ingeteam
8. Close the metal plate that houses the electronic card.
9. In order to close the unit, connect the display connection cable and lock the cover by turning the key
supplied in the side lock.
When the charging station has been charging for two seconds its LEDs will light up red, blue and green. After
briefly verifying its status, the light will switch to green and the display will show an electric vehicle and the current
time. The station is ready and awaits identification from the user in order to begin charging.
If the station identifies any operating anomaly, the light turns red and the type of incident is shown on the display
(see section "9. Operation").
26
Installing and connecting the unit
ABA2020IQM01_A - Installation and Operation Manual