Communications Accessories; Local Communication; Ingerev City Wall, Ingerev City Ground - Ingeteam INGEREV CITY Wall Serie Manual De Instalacion Y Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Communications accessories

8. Communications accessories
INGEREV CITY charging stations have a local RS-485 data bus that enables interconnection between the stations.
Configuration and monitoring of all stations is carried out using the software provided by Ingeteam.
All the charging stations can be accessed both locally or remotely, using - for the latter - an external modem of the
installation or the modem supplied with the communications card if requested upon placing the order.
This section explains the wiring process for local connection, whereby this type of connection is available as
standard.
In order to install and operate the communications accessories that enable remote communication,
see the Communication Accessory Manual for INGEREV charging stations.

8.1. Local communication

8.1.1. INGEREV CITY Wall, INGEREV CITY Ground

Follow the instructions below to complete the local connection:
1.
Connect the communication ring. The jumper of the control cards must be removed in all the
intermediate stations of the communication ring and installed in the ends of this ring.
First station
ABA2020IQM01_A - Installation and Operation Manual
Intermediate station
Ingeteam
Final station
43
EN
ES
FR
IT

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido