Ingeteam INGEREV CITY Wall Serie Manual De Instalacion Y Uso página 55

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
Tilt sensor alarm (error code 0064)
INGEREV CITY Ground charging stations have a tilt sensor.
Make sure that the unit is installed vertically, perpendicular to the ground. If this is not the case, correct the
installation.
DC current leak (error code 0128)
Depending on the model, charging stations can have a DC current leak sensor for charging. A leak in the current
that causes the alarm to trigger originates from the electric vehicle that is being charged; thus it is not an alarm for
the charging station, rather the charge is stopped for safety reasons.
The maximum admissible limit for DC current leaks is exceeded.
Charging sequence fault (error code 0256)
Incorrect charging sequence or disconnection of the vehicle during charging. The alarm disappears upon
completing the session.
Maximum permitted charge current (error code 0512)
The vehicle has not respected the maximum charge current allowed during a maximum established time.
The alarm will disappear upon completion of the charge session of the electric vehicle causing the alarm.
ABA2020IQM01_A - Installation and Operation Manual
Ingeteam
EN
ES
FR
IT
55

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido