Product Setup; Quick Installation - D-Link DUB-H4 Guía De Instalación Rápida

PrODUCT
SETUP

QUICK INSTALLATION

DUB-H4
1. plug the power adapter into the connector located on
the back of the duB-H4. plug the other end into a wall
outlet. the led on the duB-H4 will turn green to indicate
that the hub is receiving power.
Note: this step is optional, but required for Fast-charge
mode. please refer to the next page for more information.
2. plug the smaller end of the included usB cable into the
back of the duB-H4.
3. plug the rectangular end of the included usB cable
into an available usB port on your computer.
4. Your computer will automatically detect and install the
drivers for the duB-H4. You may now connect usB 2.0
or usB 1.1 devices to any available usB port.
the black usB port with the battery icon is for connecting
®
to an ipad or other high-power device, and can quick-
charge these devices when in Fast-charge mode. please
refer to the next page for more information.
Note: power draw for devices connected to the white
ports should not exceed 500 ma, and the combined power
draw of all connected devices should not exceed 2 a.
3