Package Contents; Product Setup - D-Link DES-1005P Guia De Instalacion

Ocultar thumbs Ver también para DES-1005P:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11

PACKAGE CONTENTS

CONTENTS
• DES-1005P 5-Port 10/100Mbps Unmanaged Desktop PoE Switch
• Power Adapter (53.5 V, 1.2 A)
• Power Cable
• Mounting Kit
• 4 Rubber Feet
• Quick Install Guide
If any of these items are missing from your packaging, contact your reseller.
Warning: Using a power adapter with a different voltage rating will damage and void the
warranty of this product.
INTRODUCTION
The D-Link DES-1005P 5-Port 10/100Mbps Unmanaged Desktop PoE Switch is capable of feeding
power to Power over Ethernet (PoE) devices such as network cameras. The DES-1005P has 5 ports
operating at 10/100 Mbps with 4 PoE+ ports (Ports 1 to 4) with a total PoE budget of 60W, making it
ideal for home and small office use.

PRODUCT SETUP

BEFORE SETTING UP THE DES-1005P
Please follow the steps below to set up the switch:
1. Install the DES-1005P in a cool and dry place. Refer to the Technical Specifications for the
acceptable operating temperature and humidity ranges.
2. Install the switch in a site free from strong electromagnetic source, vibration, dust, and direct
sunlight.
3. Leave at least 10 cm of space at the left and right-hand side of the switch for ventilation.
4. Visually inspect the power jack and make sure that it is fully secured to the power adapter.
Do not stack any device on top of the switch.
MOUNTING
• You may mount the switch on a wall with the included mounting kit. Two mounting slots are
provided on the bottom of the switch for this purpose.
2
DES-1005P

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dgs-1005p

Tabla de contenido