Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch EasyHeat 500 Manual Original

Ocultar thumbs Ver también para EasyHeat 500:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
OBJ_BUCH-3137-001.book Page 12 Tuesday, November 28, 2017 9:26 AM
12 | English
All application examples can be performed without accesso-
ries except for "Strip paint from window frames". However,
the use of recommended accessories simplifies the work and
significantly improves the quality of the result.
 Be careful when changing the nozzle! Do not touch the
hot nozzle. Allow the power tool to cool down and wear
protective gloves while changing the nozzle. Danger of
burning oneself on the hot nozzle.
Removing Varnish/Softening Adhesives (see figure A)
Fit the surface nozzle 5 (accessories). Briefly soften the paint
with hot air and remove it with a clean spatula. Long heat
exposure burns the paint and makes removal more difficult.
Many adhesives become soft when heated. Heated adhesives
allow for bonds to be separated or excessive adhesive to be
removed.
Strip paint from window frames (see figure B)
 Use of the glass protection nozzle 6 (accessory) is es-
sential. Danger of glass breaking.
Defrosting Water Pipes (see figure C)
 Before heating pipes, check to make sure that it is actu-
ally a water pipe. Water lines often do not differ in appear-
ance from gas lines. Gas lines are not to be heated under
any circumstances.
Place on the angle nozzle 7 (accessory). Heat the frozen zone
always from the outside to the middle.
Heat up plastic pipes as well as connections between pipe
pieces especially careful to prevent damage.
Shaping Plastic Tubing (see figure D)
Fit the reflector nozzle 8 (accessories). Fill plastic pipes with
sand and seal them on both sides to prevent the pipe bending.
Carefully and evenly heat the pipe by moving the tool back
and forth from one side to the other.
Eliminating weeds (see figure E)
Fit the reduction nozzle 9 (accessories). Select the highest
power setting. Aim the heat jet at the weeds. This will cause
the weeds to die off the in the following days. It is not neces-
sary to completely burn the weeds.
Shrinking (see figure F)
Fit the reflector nozzle 8 (accessories). Choose the diameter
of the heat shrink plastic tube 10 (accessories) suitable for
the workpiece. Evenly heat the heat shrink plastic tube until it
fits closely against the workpiece.

Maintenance and Service

Maintenance and Cleaning

 Before any work on the machine itself, pull the mains
plug.
 For safe and proper working, always keep the machine
and ventilation slots clean.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in
order to avoid a safety hazard.
1 609 92A 3U2 | (28.11.17)

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can
also be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
Bosch Power Tools

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Universalheat 600

Tabla de contenido