Operation Of The Switchgear - salmson SC-Fire Diesel Instalacion Y Puesta En Servicio

Logic reversal of the collective fault signal (SSM)
The required logic of the SSM can be set in menu
5.5.2.0. In this case, it is possible to select
between negative logic (falling edge in case of a
fault = "fall") or positive logic (rising edge in case
of a fault = "raise").

6.2.2 Operation of the switchgear

Operating elements
• Main switch on/off (lockable in "Off" position)
• The LCD shows the operating statuses of the
pump and the settings menu. The menu selection
and parameter input are performed using the
operating knob. Turn the knob to change values
or to scroll through a menu level; press it in order
to select and confirm:
The following graphic symbols are used:
Symbol Function/description
Go back (brief press: one menu level; long press: main screen)
EASY menu
EXPERT menu
1st meaning: Service not logged in
2nd meaning: Display value – no entry possible
Service menu
Parameter
Information
Fault
Reset fault
Installation and operating instructions Salmson SC-Fire Diesel
Information appears on the display as shown in
the sample illustration below:
1
4
5
4
Item Description
1 Menu number
2 Value display
3 Units display
4 Standard symbols
5 Graphic symbols
English
2
3
Availability
All
All
All
All
All
All
All
All
All
39