Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT, RETAIN FOR FUTURE
REFERNCE: READ CAREFULLY.
Check the box contents.
•
To avoid damaging the cot during
•
assembly,
please
packaging materials on a clean, flat
surface.
ATTENTION!
•
performed by an adult only.
IMPORTANT: To assemble the cot
•
correctly,
carry
operations in the indicated order.
Incorrect assembly operations could
make the cot unsafe.
WARNING: Be aware of the risk of open
•
fire and other sources of strong heat,
such as electric bar fires, gas fires, etc.
in the near vicinity of the cot.
WARNING! Do not use the cot if any
•
part is broken, torn or missing and
use only spare parts approved by the
manufacturer.
WARNING! Do not leave anything in
•
the cot or place the cot close to another
product, which could provide a foothold
or present a danger of suffocation or
strangulation, e.g. strings, blind/curtain
cords, etc..
WARNING! Do not place more than
•
one mattress in the cot.
If you leave the child unattended in the
•
cot, always make sure that the movable
side is closed.
There must be a distance of at least 500
•
mm between the upper surface of the
chosen mattress and the upper border
of the bed sides.
This cot requires a 124x63 cm mattress.
•
Maximum mattress thickness: 12 cm.
The dimension shall take into account
•
EN
remove
all
Assembly
must
out
the
assembly
-
warning
that there shall be no gap more than
30 mm between the mattress and the
the
sides end ends in any position of the
mattress.
Periodically check that the screws are
•
be
tightened correctly.
Should any screws be loose, tighten
•
them to avoid the risk that any object
(necklaces,
remain entangled and pose a risk of
strangulation.
In order to prevent falls, when baby can
•
climb out of the cot, stop using the cot
itself.
Use only spare parts supplied or
•
authorized by the manufacturer.
Correct use and maintenance will make
•
the cot durable and safe over time.
clothes,
etc.)
could
Publicidad
