Vimar ELVOX RS14 Manual Para El Conexionado Y El Uso página 29

Error
Cause
- Undervoltage, operator system
Message 26
overloaded at maximum power
setting, 16.
- Door movement too stiff or irregular.
Message 28
- Door blocked.
- Automatic cut-out is set to be too
sensitive.
- Electronics are defective.
Message 35
- Shorting plug removed, although a
Message 36
stop button is not connected.
- Closed circuit is interrupted.
Legend:
LED off
LED on
LED flashes slowly
LED pulses
LED flashes quickly
Factory default setting
Not possible
EN
Solution
- Have the external power supply checked.
- Check the path of the door and ensure that the door
moves easily.
- Have the automatic cut-out facility checked by an
expert (Section 8.2 / Level 2 / Menu 3+4).
- Have the operator system checked.
- Connect stop button or insert shorting plug (Section 6.5).
27