Health O Meter PRO PLUS 2101KL Manual De Instrucciones página 9

02 Tare Weight
Before making changes to this scale setting, please refer to page 6 "Menu" to temporarily
activate the Menu key.
NOTE: Due to the scale's sensitivity, we recommend using the REWEIGH function prior to
setting the TARE weight, in order to eliminate any operator interference with the item to
be tared out.
There are two ways to manually enter a tare weight (such as the weight of a wheelchair, shoes,
etc): press MENU (1),
If there is no weight on the scale platform (value displayed is zero and there is no tare) and the
user presses the TARE button (9), the Tare Weight window appears and prompts the user to
enter the TARE value and to press ENTER. NOTE: The tare weight must be entered using the
following increments: 4oz, 0.2lb, ¼ lb. The value entered will display in minus (-). After the TARE
has been entered, the scale goes back to normal operation. This TARE value is stored in
memory until changed or cleared. If the tare weight is not entered in 30 seconds the scale will
revert back to normal operation, and the Menu Lock will be activated.
Important: The TARE weight cannot exceed 250lb
Figure 4. Weight Display Mode
hold for 5 seconds
and select option 02-Tare Weight or press TARE (9).
8