Black and Decker LST136 Manual De Instrucciones

40V MAX* LiTHiUM TRIMMER/EDGER
iNSTRUCTiON MANUAL
IVlodel Number LST136
PLEASE READ BEFORE RETURNING
THIS PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your
Black & Decker purchase, go to
WWW.BLACKANDDECKER.COM/INSTANTANSWERS
for instant answers 24 hours a day.
If you can't find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mort. - Fri
to speak with an agent.
Please have the catalog number available when you call.
SAVE THiS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPANOL EN LA CONTRAPORTADA.
POUR LE FRAN(_AIS, VOIR LA COUVERTURE ARRIERE.
DE OPE.RACION, CENTROS DE SERVICIO
INSTRUCTIVO
Y POLIZA DE GARANTIA. ADVERTENClA: LEASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a
workload) is 40 volts. The nominal voltage is 36.
IVlodel # LST136
KEY iNFORMATiON YOU SHOULD KNOW:
• The guard must be installed before trimming or edging = if
not, the motor will overheat (page 8).
• When replacing the line, use only .065 inch diameter
ROUND line (B&D Model #AF-100 is recommended) -
otherwise the tool will not function properly (page 11).
• Do not bump the feed head against the ground - it will
disrupt the feed mechanism.
• For use only with LB series 36v or 40v Max* batteries.