Tool Specifications; Maintenance And Cleaning; Charging The Battery - Würth S 3-A Traducción Del Manual De Instrucciones De Servicio Original

Tool Specifications

Cordless screwdriver
Article number
Rated speed
1. gear
2. gear
Max. torque
Weight according to EPTA-Proce-
dure 01/2003
Battery
Article number
Rated voltage
Battery charger
Article number
Rated voltage
Charging current
Charge duration
Weight according to EPTA-Proce-
dure 01/2003
Protection class
A battery that is new or has not been used for a longer
period does not develop its full capacity until after
approx. 4 – 5 charging/discharging cycles.
Do not place down the battery on radiators or expose
it to intense sunlight for longer periods; temperatures
above 50 °C cause damage.
Keep the contacts/terminals of the charger and
replaceable battery clean. For optimal service life, fully
charge the battery after use.
For maximum service life of the battery, remove it from
the charger after charging.

Charging the Battery

Press the battery unlocking button 6 and remove the
battery 7.
Charge the battery in the battery charger. When the
charging procedure is over, the charger automatically
switches to trickle charging. The LED indicator 8 lights
up.
The battery can remain in the battery charger and is
thus always ready for operation.
0700 102 X
0 – 220 rpm
0 – 450 rpm
0700 970 914
AL 60-S3
0700 873
Battery
If the battery temperature is too high or too low, the
battery will not be charged. When the battery temper-
ature is between 0 °C and 50 °C, the charging proce-
dure begins automatically.
S 3-A
Reinsert the battery 7 into the screwdriver.

Maintenance and Cleaning

4 Nm
 Before any work on the machine, remove
the battery.
0.5 kg
 For safe and proper working, always
keep the machine and ventilation slots
clean.
If the machine should fail despite the care taken in man-
3.6 V
ufacturing and testing procedures, repair should be
carried out by a Würth master-Service.
In all correspondence and spare parts orders, please
3.6 V
always include the article number given on the type
2.0 A
plate of the machine.
70 min
The current spare parts list for this power tool can be
viewed in the Internet under
0.4 kg
"http://www.wuerth.com/partsmanager"
II/ or be requested from your next Würth branch office.
For this Würth power tool, we provide a guarantee in
accordance with the legal/country-specific regulations
from the date of purchase (verified by invoice or deliv-
ery document). Damage that has occurred will be cor-
rected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth compressed-air and power tools.
Guarantee
9