Product Features; Noise/Vibration Information; Tool Specifications - Würth 0700 624 Serie Manual Del Usuario

OBJ_BUCH-1468-002.book Page 15 Wednesday, July 31, 2013 8:24 AM

Product Features

While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
The numbering of the product features refers to the illustration
of the power tool on the graphics page.
1 Tool holder
2 Locking sleeve
3 Carrying strap
4 Belt clip*
5 Battery pack*
6 Battery unlocking button*
7 Rotational direction switch
8 On/Off switch
9 "PowerLight"
10 Handle (insulated gripping surface)
11 Screwdriver bit with ball catch*
12 Universal bit holder*
13 Screwdriver bit*
14 Carbon brushes
15 Cover lid
*Some accessories shown or described are not part of
the standard delivery scope of the product.
Cordless Impact Screwdriver
Art. No.
Rated voltage
No-load speed
Impact rate
Maximum torque, hard screwdriving application according
to ISO 5393
Bolt size
Tool holder
Weight according to EPTA-Procedure 01/2003
* Value dependent of the battery pack being used

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 96 dB(A); Sound power level
107 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Impact tightening of fasteners of the maximum capacity of the
tool: a =12 m/s
h
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for differ-
ent applications, with different accessories or poorly main-
tained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.

Tool Specifications

V=
-1
min
-1
min
Nm
mm
¼" hexagon socket
kg
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
ASS 14-1/4" ASS 18-1/2"
0700 624 X 0700 625 X
14.4
0 –2800
0 –3200
150
M6 – M14
1.5/1.7*
18
0 –2800
0 –3200
180
M6 – M16
 ½"
1.6/1.8*
15