Pride Mobility PMV Serie Manual Del Propietário página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 172
I I I . B A T T E R I E S A N D C H A R G I N G
How do I change a battery in my PMV?
You may need the following to change your batteries:
 Metric/standard socket set and ratchet
 Adjustable wrench
WARNING! Do not lift beyond your physical
capability. Ask for assistance when necessary
while disassembling or assembling your PMV.
To change batteries in your PMV:
1. Remove the seat and battery shroud. See figure 11.
a. Remove the rear shroud by removing the two (2)
thumbscrews that secure it to the PMV frame, and then
lifting the shroud straight up and off of the PMV. See
figure 11.
b. Remove the battery shroud by removing the four (4)
thumbscrews that secure it to the PMV frame, and then
lifting the shroud straight up and off of the PMV. See
figure 11.
2. Disconnect the battery tie-down strap(s).
WARNING! Do not pull on electrical harness
wires directly to detach them from the
Always grasp the connector itself when discon-
necting the harness to prevent wire damage.
PMV Series
MANDATORY! Battery posts, terminals, and related accessories contain lead
and lead compounds. Wear goggles and gloves when handling batteries and
wash hands after handling.
WARNING! Always use three batteries of the exact same type, chemistry, and
amp-hour (Ah) capacity. Refer to the specifications table in this manual and
in the manual supplied with the battery charger for recommended type and
capacities.
WARNING! Do not mix old and new batteries. Always replace all three
batteries at the same time.
WARNING! Contact your authorized Provider if you have any questions
regarding the batteries in your PMV.
WARNING! Do not replace the batteries while the PMV is occupied.
WARNING! The batteries on your PMV should only be serviced or replaced by
an authorized Provider or a qualified technician.
PROHIBITED! Keep tools and other metal objects away from battery
terminals. Contact with tools can cause electrical shock.
IDENTIFICATION KEY
1. THUMBSCREW
2. REAR SHROUD
3. BATTERY SHROUD
PMV.
Figure 11. Battery Shroud Removal/
Installation
2
1
1
3
19

Publicidad

Tabla de contenido
loading

Tabla de contenido