Pride Mobility PMV Serie Manual Del Propietário página 21

I I I . B A T T E R I E S A N D C H A R G I N G
1. Secure the batteries in the battery wells by routing the provided battery straps through the battery
well slots as shown.
2. Ensure the short strap runs over the top of the long strap.
NOTE: Before securing the straps, ensure the D-ring is positioned as shown here. The D-ring should
be positioned within 1 inch (2.54 cm) of, but never touch, the battery well.
3. Any excess strapping should be placed facing the back, or next to the seat post, of the PMV.
WARNING! The battery straps should never be positioned under the battery.
Figure 14. Battery Securement
PMV Series
Battery Securement and Strap Routing
IDENTIFICATION KEY
1. REUSABLE FASTENER
2. SHORT STRAP
3. LONG STRAP
4. D-RING
4
5. FRONT SLOT
6. SIDE SLOT
7. REAR SLOT
1
2
3
7
4
6
5
21