Pull on the left handgrip to steer your PMV to the left.
Pull on the right handgrip to steer your PMV to the right.
Move the tiller to the center position to drive straight ahead.
To stop, slowly release the throttle control lever. The electronic brakes will automatically engage,
bringing your PMV to a stop.
NOTE: Your PMV's reverse speed is slower than that of the forward speed you preset with the speed
adjustment dial or on the LCD control panel.
GETTING OFF OF YOUR PMV
1. Bring your PMV to a complete stop.
2. Power down your PMV and remove the key from the key switch.
WARNING! Never attempt to get onto or off of your PMV without first removing the key
from the key switch. This will prevent the PMV from moving if accidental throttle control
lever contact is made.
3. Disengage the seat rotation lever and rotate the seat until you are facing toward the side of your PMV.
4. Make certain that the seat is fixed securely in position.
5. Carefully and safely get out of the seat and stand to the side of your PMV.
6. You can leave the seat facing to the side to facilitate boarding your PMV next time.
POWER DOWN TIMER FEATURE
Your PMV is equipped with an energy saving automatic power down timer feature designed to preserve
your PMV's battery life. If you mistakenly leave the key in the key switch and in the "on" position but do
not use your PMV for approximately 20 minutes, the PMV's controller shuts down automatically.
Although the controller is shut down, power will still be supplied to the PMV's lighting system.
If the power down timer feature takes effect, perform the following steps to resume normal operation:
1. Remove the key from the key switch.
2. Reinsert the key and power up your PMV.
PMV Series
I V . O P E R A T I O N
23