V . C O M F O R T A D J U S T M E N T S
SEATBACK ADJUSTMENT
WARNING! Do not operate your PMV with
the seatback in a reclined position.
WARNING!
pressed firmly against the seatback
while adjusting the angle.
To adjust your PMV's reclining seat, you can adjust the
seatback angle with the seatback adjustment lever. See
figure 15.
1. With your back pressed up against the seatback, lift
up on the seatback adjustment lever and lean forward
or rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the seat
is in a comfortable riding position.
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into several
positions.
1. Pull upward on the seat rotation lever to disengage
the seat. See figure 15.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
ARMREST ANGLE ADJUSTMENT
Armrest angle of your PMV can be adjusted upwards or
downwards by turning the adjustment dial. See figure 15.
NOTE: The armrests also pivot upward to make getting
on and off of your PMV easier.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to adjust
the distance between the seat and the tiller.
1. Move the seat sliding lever located at the lower left
side of the seat outward. See figure 15.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the
desired position.
ACCESSORY BRACKET
The rear-mounted accessory bracket allows you to attach
a personal accessory such as a basket, walker holder, or
oxygen tank to the back of your PMV. Utilize the detent
pin to securely mount your item to the accessory bracket.
See figure 15. See your authorized Provider for details.
PMV Series
Always
keep
your
1. UPPER SEAT POST
2. NUT
3. SEAT HEIGHT ADJUSTMENT BOLT
back
4. LOWER SEAT POST
Figure 17. Seat Height Adjustment
IDENTIFICATION KEY
1
3
2
4
25