Setting The Buzzer - Omron Gentle Temp 720 Manual De Instrucciones

2. Preparation
2.3

Setting the Buzzer

The buzzer is activated by default, but can be deactivated.
Note: The buzzer is only available in forehead measurement mode.
1.
Press the ON/MEM button to turn on the unit.
2.
Press and hold the ON/MEM button for 3 seconds.
The " " icon flashes on the display.
3.
Release the ON/MEM button.
The " " icon remains lit and the buzzer is deactivated.
Notes:
• If the ON/MEM button is pressed down for more than 5 seconds after the "
flashing, the unit turns off without deactivating the buzzer.
• To activate the buzzer again, start from step1.
" icon starts
EN
5