Using Rechargeable Batteries - AKG GB 40 Modo De Empleo

Fig. 2: Inserting a battery.
14
The status LED (4) will flash momentar ily. If the
battery is in good con dition, the status LED (4)
will extinguish.
If the status LED (4) lights constantly the bat-
tery will be dead within about 60 minutes.
Replace the battery with a new one as soon as
possible.
If the status LED (4) fails to flash momentarily
the battery is dead. Insert a new battery.
6. Slide the battery compartment lid (1) onto the
transmitter against the direction of the arrow to
the point that the lid (1) will click shut.

3.2 Using Rechargeable Batteries)

Instead of dry batteries, you can also use a 1.5-V
rechargeable battery to power the transmitter. We
recommend SANYO HR-4U (650 mAh) or
Panasonic Rechargeable PRO+ (550 mAh) NiMH
rechargeable batteries.
GB 40 guitarbug