Hoover SmartWash Manual De Usuario página 12

Using Your SmartWash™ Carpet Cleaner
4
Slowly move forward. The unit
will automatically dispense the
optimal amount of water and
cleaning solution.
5
Slowly pull backward. The unit
will automatically dry your
carpets by extracting the water.
12
6
When your cleaning is complete
and you want to reduce the
dry time, press the Dry Only
button. The Dry Only mode will
extract remaining water from
your carpet. Continue in this
mode until little water is visibly
passing through the nozzle.
7
For best results, Hoover
recommends rinsing the carpet
with clean water only. This
will remove residual carpet
cleaning solution from your
carpets. To Rinse with clean
water only, remove the Solution
Tank and then repeat steps 4
through 6.