Hoover SmartWash Manual De Usuario página 15

Maintenance
How to Remove and Clean Nozzle
1
To prevent possible leaking,
remove and empty Clean
Water Tank, Dirty Water
Tank and Solution Tank.
2
With handle in upright
position, lift up on the
Nozzle release then pull
Nozzle forward to remove
from carpet cleaner.
BE CAREFUL not to
instantly pull nozzle
straight up.
CAUTION
!
To reduce the risk of injury from moving parts, unplug before servicing.
3
4
!
Rinse debris from Nozzle.
Position Nozzle onto foot,
making sure to align the
tabs at the top of the
Nozzle with the notches
inside the foot.
IMPORTANT
!
The nozzle must be in the proper position for the unit to have proper suction.
5
Slide Nozzle forward to
snap into position.
!
15