GE Profile CustomStyle 24 Serie Manual Del Propietário página 18

Replacing the light bulbs.
Turning the control to the OFF or 0 position does not remove power to the light circuit.
Fresh Food Compartment--Upper Light
_] Unplug tile refiigerator.
[_To align the contiol knobs properly,
note position of ea(h knob fi)r proper
reassembly, move both knobs all the way
to the left, then pull them off.
[_To remove the light shield, pull it
straight out.
After replacingwith an appliancebulb of the
sameor lower wattage,reinstaflthehghtshblrL
Replace thecontrolknobs,movethemto their
previous settingsandplug therefngeratorbackin.
Fresh Food Compartment--Two Lower Lights (onsome models)
Thesehghts are located behind the top drawer
[_] Unplug the refrigerator and remove the
top drawer and (over.
[_ (hasp the bottom of the light shield
and pull it fi)rward and up to fiee its
bottoln edge.
After replacingwith an appliancebulb of the
sameor lower wattage,reinstall thehght shield,
drawerand coverand plug the refrigerator
backin.
Freezer Compartment--Non-Dispenser Models
[_] Unplug the refiigerator.
[] Remove tile sheltjust below light shield.
[_] Pull the plastic light shield, whi(h is
underneath the ice compartment,
toward you.
After replacingwith an appliancebulb of the
sameor lower wattage,reinstall theshieldand
shelf,and plug the refrigeratorbackin.
B I iii
I
Screw
Freezer Compartment--Dispenser Models
[_] Unplug the refiigerator.
[_ Remove the ice storage bin.
[_] Remove screw at top of light shield.
After replacingwith an appliancebulb of the
sameor lower wattage,reinstall theshieldand
ice storagebin,and plug therefrigeratorbackin.
18